WAN Setup - Summary

Make sure that the settings below match the settings provided by your ISP.

PORT /VPI / VCI:	0 / 8 / 35
Connection Type:	PPPoE
Service Name:	pppoa_0_8_35_1
Service Category:	UBR
IP Address:	Automatically Assigned
Service State:	Enabled
NAT:	Enabled
Firewall:	Enabled
IGMP Multicast:	Disabled
Quality Of Service:	Disabled

Click "Save" to save these settings. Click "Back" to make any modifications.
NOTE: You need to reboot to activate this WAN interface and further configure services over this interface.